GERTY Solution

🌐 KR

Description

  • 2nd Milling Stage Cutting Toolpath Component: Outputs values that divide curves parallel between curves of different lengths in the direction of the Cutting Direction, as shown in the figure below.

Input

  • Brep: Input a Brep or Surface UV object.
  • Reference Plane: Input the reference plane for Target Orientation when Tilting weight = 0.

Built-in Param | UVFinishing

  • Cutting Direction [Boolean]: Select the direction – U (False) / V (True).
  • Stepover: Determines the amount of material removed in the horizontal direction. The default value is less than or equal to half the end mill diameter, allowing for finer finishing. (Stepover <= End Mill Diameter * 1/2)
  • Tilting Weight: Weight for Target Tilting, accepts values between 0.0 and 1.0. Closer to 0 means the Target Plane aligns with the normal of the Base Plane; closer to 1 means it aligns with the normal of the Surface.
  • Tolerance: Toolpath resolution.


Output

  • Curve: Outputs the curves of the finishing layer.
  • Target Plane: Outputs the indices of planes as a DataTree.